Bostitch C10P131DG Thickcoat Round Head 3-Inch by .131-Inch by 15 Degree Wire Collated Coil Framing Nail (2,700 per Box)

Bostitch 15 Degree Coil Framing Nail


framing nailer gun

B & C Eagle A3X120HDR/22 Full Head 3-Inch by .120-Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box)

Customer Review: Cheap Imports
I bought these nails because I didn't need that many 3" ring shank for my Hitachi NR90 nailer. Very few carry over 2 3/8" in a ring shank, and those that do charge about $30 or more to ship. So 500 nails for $30 with free shipping was worth a try. The nails look like someone made them by hand. The coating is very thick and not uniform; so the "ring" portion is a hit or miss affair, leaving some nails looking as though they had virtually no rings at all. Some of the nails were also slightly bent; not an issue when using a hammer, but hopefully it won't jam my nailer. I test shot a strip, shooting a short piece of Timberstrand dimensional lumber into another piece of Timberstrand (I rarely use pine 2 by's). Nailing into Timberstrand requires more nailer power which my NR90 had no problem with. On the plus side, the nailer worked fine and the board was extremely difficult to dislodge from the other board using three of these nails; so I think they'll work for my purposes. For a comparision between these nails and my Hitachi ring shank nails; see the above photo.
Customer Review: Work Fine
Yeah, well these are very hard to come by in Ohio for some reason. Nobody carries plastic collated nails around me (all clipped head wire collated) so I was happy to find them here. Built a shed last year using a couple thousand of this brand of nail last year. Worked perfectly, no jams, bent nails, missing heads, etc. Hold is excellent due to galv.


framing nailer gun

Pneu-Fast BD8DXR 2-3/8-by-0.120-Inch Ring Framing Nail for 28-Degree Framing Nailers, 5000-Count

The Pneu-Fast BD series nails are the premier 28 Degree clipped head nails in the industry. These nails are collated precisely even for problem free nailing and are made from the finest steel manufactured to full gauge for more driving force and lateral sheer strength. Pneu-Fast has been manufacturing these collated BD series nails and staples in the USA for over 30 years at the highest industry specifications. In addition, the BD Pneu-Fast Nails have a superior tape with Hi-Bond resin to create a very rigid strip that will not come apart or de-form in rain, water or humidity. An exclusive Hole-Fast acrylic coating glue delivers the highest holding power in all types of wood. All of the Pneu-Fast nails are packaged in sturdy weather proof cartons that will not fall apart on the job site. All Pneu-Fast nails meet or exceed ASTM performance standards. The BD series nails fit a large variety of tools including: Airy ANB288C, Atro CHS900, CHS928, Basso N90SB, Bostitch N80 SB, N100S, Campbell Hausfield NS289000, Craftsman 18320, 18430,18420X, Max SN890CH/28, Hitachi NR90AF


framing nailer gun